Gyundoan-Han GH-36 Mulsuri: Difference between revisions

Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{WIP}}
{|{{Infobox aircraft begin
|name= GH-36 Mulsuri
|image=
|caption=
|alt=
}}{{Infobox aircraft type
|type= Heavy {{wp|gyrodyne|compound}} {{wp|utility helicopter}}
|manufacturer= Gyundoan-Han Helicopter Factory
|national origin= [[Menghe]]
|designer=
|first flight= 2012
|introduced= 2018
|retired=
|status= In service
|primary user= [[Menghean Navy]]
|more users=
|produced=2017-present
|number built=
|unit cost=
|developed from=
|variants with their own articles=
|developed into=
}}
|}


The '''Gyundoan-Han GH-36 "Mulsuri"''' (Osprey) is a twin-turbine-engine heavy {{wp|Gyrodyne|compound}} {{wp|utility helicopter}} designed in Menghe by the Gyundoan-Han design bureau. It is built in a number of variants, including the utility transport GH-36G, the ASW/ASuW-focused GH-36N, and the troop transport GH-36D. Its most distinctive feature is a push rotor in the tail boom, which, in conjunction with aerodynamic stub wings and a tandem rotor, allows the helicopter to cruise at speeds of 410 kilometers per hour.
The '''Gyundoan-Han GH-36 "Mulsuri"''' (Osprey) is a twin-turbine-engine heavy {{wp|Gyrodyne|compound}} {{wp|utility helicopter}} designed in Menghe by the Gyundoan-Han design bureau. Its most distinctive feature is a push rotor in the tail boom, which, in conjunction with a streamlined airframe and a {{wp|coaxial rotor aircraft|coaxial rotor}}, allows the helicopter to cruise at speeds of 410 kilometers per hour and reach maximum speeds of 450 kilometers per hour. It is primarily used by the [[Menghean Navy]] in the anti-submarine and utility transport roles.


==Development==
==Development==
The GH-36 grew out of a [[Menghean Navy|Navy]] requirement for an anti-submarine-focused helicopter which could cover a wider area of ocean than the existing [[Gyundoan-Han GH-28 Ppulsoeori]]. The designers focused on increasing the helicopter's cruise speed, which would allow it to deploy a larger sonobuoy field in the same span of time. Increased speed also conferred other advantages. Arriving more quickly at a transient sonar contact reduces the area of uncertainty around the submarine's possible location, as it cannot travel as far before the helicopter arrives. Once on site, a faster helicopter can also lay rows of sonobuoys more quickly, increasing the chance of detecting a submarine in a V-type search pattern.
The GH-36 grew out of a [[Menghean Navy|Navy]] requirement for an anti-submarine-focused helicopter which could cover a wider area of ocean than the existing [[Gyundoan-Han GH-28 Ppulsoeori]]. The designers focused on increasing the helicopter's cruise speed, which would allow it to deploy a larger sonobuoy field in the same span of time. Increased speed also conferred other advantages: a faster sprint speed results in a shorter reaction time to transient sonar contacts, and a smaller search area upon arrival. Once on site, a faster helicopter can also lay rows of sonobuoys more quickly, increasing the chance of detecting a submarine in a V-type search pattern.


To better exploit this increased speed, the helicopter would require more sonobuoys; to better exploit a larger sonobuoy payload, it would require greater endurance; and to better exploit greater endurance, it would require a heavier weapon load. All of these requirements resulted in increasingly large sizes for the competition entries. Because the Navy planned to use the new type on the [[Hasŏ-class cruiser]]s, still in development, this was deemed to be an acceptable constraint.
To better exploit this increased speed, the helicopter would require more sonobuoys; to better exploit a larger sonobuoy payload, it would require greater endurance; and to better exploit greater endurance, it would require a heavier weapon load. All of these requirements resulted in increasingly large sizes for the competition entries. Because the Navy planned to use the new type on the [[Hasŏ-class cruiser]]s, still in development, increased size was deemed to be an acceptable constraint.
 
While design work was underway, the [[Ministry of National Defense (Menghe)|Ministry of National Defense]] observed that the helicopter's speed, power, and internal volume would make it well-suited to transport roles, and proposed that a general-purpose utility variant be designed. Previously, the Menghean Navy had relied on a combination of [[Gyundoan-Han GH-28 Ppulsoeori|GH-28]] utility models for ship-to-ship {{wp|vertical replenishment}} and larger land-based helicopters for shore-to-ship {{wp|carrier onboard delivery}}; but the GH-28 lacked a rear ramp for easy unloading, and land-based helicopters lacked folding rotors and could only park temporarily on a carrier's deck or lower supplies from the air.
 
==Design==
Like the [[GHK-38 Wolverine]], whose development it influenced, the GH-36 uses a {{wp|coaxial rotor aircraft|coaxial rotor}} to increase lift and stability for a given rotor diameter and eliminate the need for a side-facing tail rotor. Instead, the GH-36 has a pusher propeller on its tail boom, resulting in a {{wp|gyrodyne}} configuration. This enables the helicopter to cruise at speeds in excess of 400 kilometers per hour.
 
Most Navy variants of the GH-36, including both the GH-36DJG and the GH-36SG, have an {{wp|aerial refueling}} probe under the lower right corner of the nose. This probe has a telescoping design, and can extend in flight to clear the rotor blades, otherwise retracting to reduce the helicopter's deck parking footprint. Aerial refueling allows the GH-36SG to reach surface ship formations far from its takeoff point, and can extend the patrol time of the GH-36DJG.
 
Because the GH-36 is designed for use aboard ships, the main rotor blades are hinged and can fold over the rear fuselage. The tail boom is thick and non-folding.


==Variants==
==Variants==
===GH-36G===
===GH-36DJG===
The GH-36G is the baseline utility model which grew out of Gyundoan-Han's concept-demonstration prototype. It has no armament or hardpoints, and no sensors apart from basic navigation equipment. Crew and passengers can enter through vertically-opening clamshell doors on the right side of the cockpit, and there is a cargo ramp under the tail boom. There are also emergency exit windows to the left of the cockpit and on both sides of the fuselage aft. On the military version of the GH-36G, the cargo bay is left empty, and can be either loaded with light vehicles and supplies, or fitted with stretchers or canvas seats. This variant is mainly used for supply transport and personnel transport missions within friendly lines, including {{wp|vertical replenishment}} of certain ship classes. The GH-36D specializes in air assault against hostile areas.
The GH-36DJG is a specially designed variant for anti-submarine operations, and the original objective of the project. It was first introduced on the [[Hasŏ-class cruiser]]s and [[Insŏng-class destroyer]]s. It can carry a total of 42 sonobuoys, with 30 in a reserve storage rack and 12 in two revolver assemblies ready for ejection. These are typically a mix of active and passive sonobuoys, as well as a few special-purpose sonobuoys for measuring water temperature and currents and communicating with submarines. Within the four-man crew, the assistant sonar operator is tasked with manually loading sonobuoys from the reserve rack to the ready revolvers; once back at his seat, he remotely controls the revolvers, selecting the desired sonobuoy type and ejecting it through a small hatch in the bottom of the fuselage. Because of this ejection system, the cabin is not pressurized, which limits the GH-36DJG's maximum safe altitude.


===GH-36N===
Unlike the GH-36SG, which has large {{wp|sponson}}s on either side of the fuselage, the GH-36DJG has two stub wings, each supporting two hardpoints. It is able to carry torpedoes, anti-ship missiles, and air-to-air missiles, as well as rocket pods and bombs. These diverse payload options allow the GH-36DJG to engage in anti-surface missions, attacking isolated corvettes, auxiliary ships, and small craft. [[YGG-5 Dando]] air-to-air missiles provide a small measure of self-defense capability when operating in contested airspace, and allow the helicopter to engage targets of opportunity, such as enemy helicopters and {{wp|maritime patrol aircraft}}.
The GH-36N is a specially designed variant for naval operations, and the original objective of the project. It was first introduced on the [[Hasŏ-class cruiser]]s and [[Insŏng-class destroyer]]s. It can carry a total of 42 sonobuoys, with 30 in a reserve storage rack and 12 in two revolver assemblies ready for ejection. These are typically a mix of active and passive sonobuoys, as well as a few special-purpose sonobuoys for measuring water temperature and currents and communicating with submarines. Within the four-man crew, the assistant sonar operator is tasked with manually loading sonobuoys from the reserve rack to the ready revolvers; once back at his seat, he remotely controls the revolvers, selecting the desired sonobuoy type and ejecting it through a small hatch in the bottom of the fuselage. Because of this ejection system, the cabin is not pressurized, which limits the GH-36N's maximum safe altitude.


Unlike the GH-36G and GH-36D, which have large {{wp|sponson}}s on either side of the fuselage, the GH-36N has two stub wings, each supporting two hardpoints. It is able to carry torpedoes, anti-ship missiles, and air-to-air missiles, as well as rocket pods and bombs. These diverse payload options allow the GH-36N to engage in anti-surface missions, attacking isolated corvettes, auxiliary ships, and small craft. The YGG-7 air-to-air missiles also provide a small measure of self-defense capability when operating in contested airspace. Owing to the GH-36N's slow speed, low ceiling, and poor agility, it is unlikely that it would be able to engage fighter aircraft such as the {{wp|Dassault Rafale}} on anything close to equal terms, but air-to-air armament could complicate interception, and would allow the GH-36N to pick off enemy anti-submarine helicopters.
Because the sponsons were reduced in size to make space for these stub wings, extra fuel tanks are carried inside the cargo compartment, which is also occupied by sonobuoy storage, sonar-processing computer equipment, and the sonar operator stations.


Because the sponsons were removed to make space for these stub wings, extra fuel tanks are carried inside the cargo compartment, which is also occupied by sonobuoy storage, sonar-processing computer equipment, and the sonar operator stations. An extendable boom probe on the lower right corner of the fuselage allows for in-flight refueling from slow-flying fixed-wing aircraft, though GH-36Ns seldom exploit this capability as there are no tankers in the air wings of Menghean carrier battle groups and anti-submarine battle groups.
Sensors consist of a deployable {{wp|magnetic anomaly detector}} over the left side sponson, a surface-search radar under the fuselage for detecting periscopes and snorkels, and an electro-optical sensor under the nose. Chaff/flare ejectors are installed on either side of the tail, and four missile approach warning lenses and radio frequency jammers are spread around the airframe.


Sensors consist of a deployable {{wp|magnetic anomaly detector}} over the right side sponson, a surface-search radar under the fuselage for detecting periscopes and snorkels, and an electro-optical sensor under the nose. Chaff/flare ejectors are installed on either side of the tail, and four jammers are spread around the airframe.
===GH-36SG===
The GH-36SG is the baseline utility model which grew out of Gyundoan-Han's concept-demonstration prototype. It has no armament or hardpoints, and no sensors apart from basic navigation equipment. Crew and passengers can enter through vertically-opening clamshell doors on the right side of the cockpit, and there is a cargo ramp under the tail boom. There are also emergency exit windows on each side of the cockpit and on the left side of the fuselage aft. On the military version of the GH-36SG, the cargo bay is left empty, and can be either loaded with light vehicles and supplies, or fitted with stretchers or folding seats.


The main rotors can fold to allow easier hangar storage. The tail, however, does not fold, in part because of its thickness with twin stabilizers included and in part because of the heavy driveshaft to the psuher propeller.
This model is mainly used for supply transport and personnel transport missions within friendly airspace, including {{wp|vertical replenishment}} of certain ship classes.


===GH-36D===
===GH-36SGG===
The GH-36D was specially developed in 2017 to test the feasibility of carrying out heliborne air assaults across the Strait of Portcullia. It has a refueling probe like the GH-36N, but retains the hull sponsons and rear cargo door of the GH-36G. It also adds a winch on either side of the airframe above the forward doors, allowing transported troops to {{wp|fast-roping|fast-rope}} to the ground. The GH-36D lacks the range to make a round trip across the strait on its own internal fuel, but could top off its tanks en route and during the return. Such an operation would be extremely risky, however, and some reports suggest that Menghe's GH-36Ds will be assigned to the new class of {{wp|landing helicopter dock}} ships upon their completion.
The GH-36SGG was specially ordered in 2017 for Menghe's Marine Infantry. It consists of a GH-36SG fitted with missile warning systems and countermeasures, and the ability to mount machine guns in the opened right-side clamshell door and forward left-side emergency exit. The Menghean armed forces initially saw it as a potential platform for conducting surprise heliborne assaults across the Strait of Portcullia, which it would be able to cross with the help of aerial refueling. In 2020, however, the Navy determined that the risk of such an operation was too high, and made no infantry attacks on the island of Portcullia during the 2022 [[One-Month War]]. Instead, the few ordered GH-36SGGs are used on Menghe's {{wp|landing helicopter dock}}s.


==Ship classes using the GH-36==
==Ship classes using the GH-36==
* [[Anchungang-class fast combat support ship]]
* [[Choe Sŭng-min-class aircraft carrier]]
* [[Hasŏ-class cruiser]]
* [[Hasŏ-class cruiser]]
* [[Insŏng-class destroyer]]
* [[Insŏng-class destroyer]]
Line 33: Line 67:
* {{flag|Menghe}}
* {{flag|Menghe}}


==Specifications (GH-36N)==
==Specifications (GH-36DJG)==
{{Aircraft specs
{{Aircraft specs
|ref=<!-- reference -->
|ref=<!-- reference -->

Latest revision as of 15:20, 25 January 2024

GH-36 Mulsuri
Role Heavy compound utility helicopter
National origin Menghe
Manufacturer Gyundoan-Han Helicopter Factory
First flight 2012
Introduction 2018
Status In service
Primary user Menghean Navy
Produced 2017-present

The Gyundoan-Han GH-36 "Mulsuri" (Osprey) is a twin-turbine-engine heavy compound utility helicopter designed in Menghe by the Gyundoan-Han design bureau. Its most distinctive feature is a push rotor in the tail boom, which, in conjunction with a streamlined airframe and a coaxial rotor, allows the helicopter to cruise at speeds of 410 kilometers per hour and reach maximum speeds of 450 kilometers per hour. It is primarily used by the Menghean Navy in the anti-submarine and utility transport roles.

Development

The GH-36 grew out of a Navy requirement for an anti-submarine-focused helicopter which could cover a wider area of ocean than the existing Gyundoan-Han GH-28 Ppulsoeori. The designers focused on increasing the helicopter's cruise speed, which would allow it to deploy a larger sonobuoy field in the same span of time. Increased speed also conferred other advantages: a faster sprint speed results in a shorter reaction time to transient sonar contacts, and a smaller search area upon arrival. Once on site, a faster helicopter can also lay rows of sonobuoys more quickly, increasing the chance of detecting a submarine in a V-type search pattern.

To better exploit this increased speed, the helicopter would require more sonobuoys; to better exploit a larger sonobuoy payload, it would require greater endurance; and to better exploit greater endurance, it would require a heavier weapon load. All of these requirements resulted in increasingly large sizes for the competition entries. Because the Navy planned to use the new type on the Hasŏ-class cruisers, still in development, increased size was deemed to be an acceptable constraint.

While design work was underway, the Ministry of National Defense observed that the helicopter's speed, power, and internal volume would make it well-suited to transport roles, and proposed that a general-purpose utility variant be designed. Previously, the Menghean Navy had relied on a combination of GH-28 utility models for ship-to-ship vertical replenishment and larger land-based helicopters for shore-to-ship carrier onboard delivery; but the GH-28 lacked a rear ramp for easy unloading, and land-based helicopters lacked folding rotors and could only park temporarily on a carrier's deck or lower supplies from the air.

Design

Like the GHK-38 Wolverine, whose development it influenced, the GH-36 uses a coaxial rotor to increase lift and stability for a given rotor diameter and eliminate the need for a side-facing tail rotor. Instead, the GH-36 has a pusher propeller on its tail boom, resulting in a gyrodyne configuration. This enables the helicopter to cruise at speeds in excess of 400 kilometers per hour.

Most Navy variants of the GH-36, including both the GH-36DJG and the GH-36SG, have an aerial refueling probe under the lower right corner of the nose. This probe has a telescoping design, and can extend in flight to clear the rotor blades, otherwise retracting to reduce the helicopter's deck parking footprint. Aerial refueling allows the GH-36SG to reach surface ship formations far from its takeoff point, and can extend the patrol time of the GH-36DJG.

Because the GH-36 is designed for use aboard ships, the main rotor blades are hinged and can fold over the rear fuselage. The tail boom is thick and non-folding.

Variants

GH-36DJG

The GH-36DJG is a specially designed variant for anti-submarine operations, and the original objective of the project. It was first introduced on the Hasŏ-class cruisers and Insŏng-class destroyers. It can carry a total of 42 sonobuoys, with 30 in a reserve storage rack and 12 in two revolver assemblies ready for ejection. These are typically a mix of active and passive sonobuoys, as well as a few special-purpose sonobuoys for measuring water temperature and currents and communicating with submarines. Within the four-man crew, the assistant sonar operator is tasked with manually loading sonobuoys from the reserve rack to the ready revolvers; once back at his seat, he remotely controls the revolvers, selecting the desired sonobuoy type and ejecting it through a small hatch in the bottom of the fuselage. Because of this ejection system, the cabin is not pressurized, which limits the GH-36DJG's maximum safe altitude.

Unlike the GH-36SG, which has large sponsons on either side of the fuselage, the GH-36DJG has two stub wings, each supporting two hardpoints. It is able to carry torpedoes, anti-ship missiles, and air-to-air missiles, as well as rocket pods and bombs. These diverse payload options allow the GH-36DJG to engage in anti-surface missions, attacking isolated corvettes, auxiliary ships, and small craft. YGG-5 Dando air-to-air missiles provide a small measure of self-defense capability when operating in contested airspace, and allow the helicopter to engage targets of opportunity, such as enemy helicopters and maritime patrol aircraft.

Because the sponsons were reduced in size to make space for these stub wings, extra fuel tanks are carried inside the cargo compartment, which is also occupied by sonobuoy storage, sonar-processing computer equipment, and the sonar operator stations.

Sensors consist of a deployable magnetic anomaly detector over the left side sponson, a surface-search radar under the fuselage for detecting periscopes and snorkels, and an electro-optical sensor under the nose. Chaff/flare ejectors are installed on either side of the tail, and four missile approach warning lenses and radio frequency jammers are spread around the airframe.

GH-36SG

The GH-36SG is the baseline utility model which grew out of Gyundoan-Han's concept-demonstration prototype. It has no armament or hardpoints, and no sensors apart from basic navigation equipment. Crew and passengers can enter through vertically-opening clamshell doors on the right side of the cockpit, and there is a cargo ramp under the tail boom. There are also emergency exit windows on each side of the cockpit and on the left side of the fuselage aft. On the military version of the GH-36SG, the cargo bay is left empty, and can be either loaded with light vehicles and supplies, or fitted with stretchers or folding seats.

This model is mainly used for supply transport and personnel transport missions within friendly airspace, including vertical replenishment of certain ship classes.

GH-36SGG

The GH-36SGG was specially ordered in 2017 for Menghe's Marine Infantry. It consists of a GH-36SG fitted with missile warning systems and countermeasures, and the ability to mount machine guns in the opened right-side clamshell door and forward left-side emergency exit. The Menghean armed forces initially saw it as a potential platform for conducting surprise heliborne assaults across the Strait of Portcullia, which it would be able to cross with the help of aerial refueling. In 2020, however, the Navy determined that the risk of such an operation was too high, and made no infantry attacks on the island of Portcullia during the 2022 One-Month War. Instead, the few ordered GH-36SGGs are used on Menghe's landing helicopter docks.

Ship classes using the GH-36

Users

Specifications (GH-36DJG)

General characteristics

  • Crew: 4 (pilot, copilot, 2 sonar operators)
  • Length: 16.93 m (55 ft 7 in) fuselage only, probe retracted
  • Wingspan: 4.93 m (16 ft 2 in)
  • Height: 5.16 m (16 ft 11 in)
  • Empty weight: 9,702 kg (21,389 lb)
  • Max takeoff weight: 16,500 kg (36,376 lb)
  • Powerplant: 2 × Taesan T508-1 Turboshaft, 2,400 kW (3,200 hp) each
  • Main rotor diameter: 2× 14.98 m (49 ft 2 in)
  • Main rotor area: 1,409.9 m2 (15,176 sq ft)
  • Propellers: single blade, 3.39 m (11 ft 1 in) diameter

Performance

  • Maximum speed: 450 km/h (280 mph; 243 kn)
  • Cruise speed: 410 km/h (255 mph; 221 kn)
  • Never exceed speed: 460 km/h (286 mph; 248 kn)
  • Range: 1,200 km (746 mi; 648 nmi)
  • Service ceiling: 4,850 m (15,910 ft)

Armament


See also

Retrieved from "https://iiwiki.us/mediawiki/index.php?title=Gyundoan-Han_GH-36_Mulsuri&oldid=757505"