Jaguar III: Difference between revisions

Jump to navigation Jump to search
Line 62: Line 62:
===''vergoldeter Jaguar'' A1===
===''vergoldeter Jaguar'' A1===


===vergoldeter Jaguar A2===
===''vergoldeter Jaguar'' A2===


===Jaguar III===
===Jaguar III===

Revision as of 01:35, 1 August 2019

Jaguar III
German Army Leopard 2A6 tank in Oct. 2012.jpg
Jaguar III Ausf. A5 of the Kaiserliche Heer
TypeMain Battle Tank
Place of origin Englean Kaiserreich
Service history
In service1983-Present
Used bySee Operators
Production history
DesignerKempenhaus-Pollmächer
Designed1976-1980
ManufacturerKempenhaus-Pollmächer
Kaiserlicher Maschinenfabrik Weilheim
Unit cost2A6: WIP
Produced1979-Present
No. built~3,250 (including foreign exports)
VariantsSee Variants
Specifications
WeightAusf A6: 62.3 t
LengthAusf A6: 9.97 m (gun forward)
WidthAusf A6: 3.75 m
HeightAusf A6: 3.0 m
Crew4

ArmourAusf A6: 3rd generation composite; including high-hardness steel, tungsten and plastic filler with ceramic component.
Main
armament
Stebertstahl KwK 78 L/44 smoothbore gun (42 rounds)
Secondary
armament
2× 7.62×51mm Kaiserlicher Waffenfabrik MG65 n.A. (4,750 rounds)
EngineMaibach MiB-45 liquid-cooled V12 twin-turbo diesel engine
1,500 PS (1,479 hp 1,103 kW at 2,600 rpm
Power/weight24.1 PS/t
TransmissionFitkau HSWL 567
SuspensionTorsion bar suspension
Fuel capacity1,200 km
Operational
range
550 km (internal fuel)
Speed68 km/h

The Jaguar III, officially Panzerkampfwagen XXII (Sd.Kfz. 4098), is a main battle tank developed by Kempenhaus-Pollmächer from 1976-1980 as a successor to the Jaguar II MBT that was seen as not sufficient for the modern battlefield. The vehicle was designed as a third-generation main battle tank with capabilities of being upgraded well into the future, and adaptable to all environments. It is armed with a 120 mm smoothbore cannon, and is powered by a V-12 twin-turbo diesel engine. As of 2019, a wide number of variants have been developed both by the Englean Kaiserreich and other operators for a variety of operations.

Early iterations of the tank continued the design of the ill-fated Jaguar II, with those up to Ausf. A4 retaining the vertical faced composite turret armour and succeeding variants (Ausf. A5-A8) sporting angled turret appliqué armour. All models feature digital fire control systems with laser rangefinders, a fully stabilised main gun and coaxial machine gun, and advanced night vision and sighting equipment. The Jaguar III is set to continue in service with the Englean Kaiserliche Heer until being fully replaced by the Jaguar IV in 2030.

History

Development

As of 1970, the Jaguar I had been in service with the Kaiserliche Heer since 1946 and was becoming dated. Although many upgrades had been developed, including a full revamped armour package and addition of a 120mm gun, the vehicle still showed its age in relation to vehicles being produced within the world. In response to this, the Oberste Heeresleitung ordered the development of a replacement MBT that would combine speed with the prototype 120mm smoothbore cannon that was also being developed at the time. Vehicle manufacturer Vollhards-Wiesgätter won the design competition with their Neu-Kampfpanzer, which implemented a vastly different chassis and turret design from the previous Jaguar I variant, the Jaguar I Ausf. L.

The design was then ordered to begin prototype production as Projekt 198 in 1972, with the first two prototypes being finished by the end of the year. These prototypes sported longer chassis, as well as a slim turret that housed the 120mm main gun intended for the MBT. However. many of the features of the vehicles did not operate as intended and eventually led to the cancellation of the project in 1974. This resulted in the Jaguar I continuing to be the primary MBT of the Kaiserliche Heer until 1976, when the OHL ordered the development of another MBT under the codename vergoldeter Jaguar. Vollhards-Wiesgätter did not enter the design competition, leaving the company Kempenhaus-Pollmächer as the design victors.

The Jaguar II was intended to succeed the Jaguar I MBT already in service with the Kaiserliche Heer since the end of the Second Great War.

Building off of the failures of the Jaguar II, Kempenhaus-Pollmächer instead designed a vehicle that would use a less problematic engine design - the V12 turbocharged Maibach MiB-45 that was recently developed. In addition, the turret would feature vertical composite armour that would be capable of defending against modern ammunition types - APFSDS, HEATFS, and standard AP/APHE rounds. By 1977, the prototypes were passing OHL exams and quickly gaining the admiration and approval of officers of the OHL. In 1978, Imperial Minister of War (Kriegsminister) Ingolf von Kohlhaase approved the OHL's request to officially procure the Kempenhaus-Pollmächer as the Jaguar III main battle tank.

The Jaguar III incorporated earlier plans for the Jaguar II, including the addition of vertical composite turret armour seen on this prototype (the vergoldeter Jaguar A2) in 1977.

Design

Variants

vergoldeter Jaguar A1

vergoldeter Jaguar A2

Jaguar III

Jaguar III Ausf. A1

Jaguar III Ausf. A2

Jaguar III Ausf. A3

Flugabwehrpanzer Jaguar III Ausf. A3

Jaguar III Ausf. A4

Jaguar III Ausf. A4+

Jaguar III Ausf. A5

Jaguar III Ausf. A5 pictured in service with the Kaiserliche Heer in 2010.

Jaguar 3S "Almfelwr"

Shastaran Jaguar 3S Almfelwr, pictured in 2009.

Jaguar III Ausf. A6

Jaguar III Ausf. A6 Häuserkampf

Jaguar III Ausf. A7

Jaguar III Ausf. A8

Engineering and driver training tanks

Bergepanzer BPz5 Greif

Technical Data

Technical data
Description Jaguar III Ausf. A4 Jaguar III Ausf. A5 Jaguar III Ausf. A6 Jaguar III Ausf. A7 Jaguar III Ausf. A8
Crew: 4
Engine: Maibach MiB-45 n.A. liquid-cooled V12 twin-turbo diesel engine
Displacement: Bore × stroke: 170 × 175 mm, 47,666 cm3 displacement
Power output: 1,500 PS (1,479 hp, 1,103 kW), rpm: 2,600/min
Torque output: 4,700 Nm (3,466 lb·ft), rpm: 1,600–1,700/min
Transmission: Hydro-mechanical control, reversing and steering gear HSWL 354 with combined hydrodynamic-mechanical service brake, 4 forward, 2 reverse
Suspension system: Torsion bar spring mounted support roller drive with hydraulic dampers
Length
Turret forward:
9,670 mm 10,970 mm
Width: 3,700 mm 3,760 mm
Height: 2,790 mm 3,030 mm
Ground clearance: 540 mm
Wading depth without preparation: 1,200 mm
Wading depth with snorkel: 4,000 mm
Trench passability: 3,000 mm
Climbing ability: 1,100 mm
Empty weight: 52 t 57.3 t 57.6 t
A6M 60.2 t
WIP
Combat weight: 55.15 t 59.5 t A6 59.9 t (maximum mass; 61.7 t),
A6M 62.5 t
WIP
Maximum speed: 68 km/h; backwards 31 km/h
Fuel capacity: 1,160 liters (limited to 900 liters when not in battle)
Fuel consumption and operating range:

Road: ca. 340 l/100 km, ca. 340 km
Terrain: ca. 530 l/100 km, ca. 220 km
Average: ca. 410 l/100 km, ca. 280 km
Static test: 12.5 l/h, 72–93 hours (with 900–1,160 liters capacity)

Rotation time (360°): 10 seconds
Armament: Stebertstahl KwK 78 L/44 smoothbore gun and 2 machine guns Stebertstahl KwK 91 L/51 smoothbore gun and 2 machine guns Stebertstahl-KWF KwK 216 L/51 smoothbore gun and 2 machine guns
Turret weight: 16 t 21 t 26 t
Turret rotation time: 360° in 9 seconds (electric)

Operators

Jaguar III operators as of 2019

Current operators