K22 Infantry Fighting Vehicle: Difference between revisions

Jump to navigation Jump to search
No edit summary
No edit summary
Line 36: Line 36:
| engine=STX Engine/MTU Friedrichshafen MT881Ka-500 {{wp|8-cylinder}} {{wp|water-cooled}} {{wp|diesel engine}}
| engine=STX Engine/MTU Friedrichshafen MT881Ka-500 {{wp|8-cylinder}} {{wp|water-cooled}} {{wp|diesel engine}}
| crew=3 crew + 8 passengers
| crew=3 crew + 8 passengers
| engine_power=750 hp (840 hp for the PIP)
| engine_power=1000 hp  
| pw_ratio=29.2 hp/tonne
| pw_ratio=29.2 hp/tonne
}}
}}

Revision as of 05:27, 13 August 2024

K22
Restmb allidxmake.jpg
K22 on combat firing practice.
TypeInfantry fighting vehicle
Place of originJoseon
Service history
In service2018–present
Production history
DesignerAgency for Defense Development
Designed2013–2016
ManufacturerHanwha Defense
Unit cost$9.8 million
Produced2017–present
Specifications
Weight32 t (31 long tons; 35 short tons)
Length8 m (26 ft)
Width3.64 m (11.9 ft)
Height3.72 m (12.2 ft)
Crew3 crew + 8 passengers

ArmorClassified composite matrix of laminated ceramicsteelnickel alloy + underlaid reactive armour. Sloped modular design.

14.5–30 mm all-around AP protection

Frontal armour is resistant to 50 mm APDS rounds fired from a XM913 chain gun

Roof armour is resistant to 155 mm artillery shell fragments

Explosive reactive armor for RPG protection

Soft- and hard-kill Active protection system, ERA, NERA
Main
armament
One K40 40 mm autocannon (240 rounds)
Two Spike NLOS ATGM launchers
Secondary
armament
7.62 mm K16 GPMG
EngineSTX Engine/MTU Friedrichshafen MT881Ka-500 8-cylinder water-cooled diesel engine
1000 hp
Power/weight29.2 hp/tonne
SuspensionPassive in-arm suspension unit (ISU)
Operational
range
500 km (310 mi)
Speed70 km/h (43 mph) (road)
40 km/h (25 mph) (cross-country)
7 km/h (4.3 mph; 3.8 kn) (water)

K22 IFV is the Royal Joseon Armed Forces's next-generation infantry fighting vehicle. It was developed to replace part of the K200 and complement the K21.

K22 was developed by improving the AS-21 Redback IFV to meet the needs of the Royal Joseon Armed Forces.

History

Design

K22 replaced the existing K-21's aluminum composite armor with steel armor, and fitted additional armor to meet the needs of the Royal Joseon Armed Forces. After all these improvements, the K22 had a stronger defense than the K21, but it weighed significantly more than the K21. Because of this, the K22 had to be equipped with a more powerful engine than the K21. The K22 addressed this issue by installing a K9 self-propelled howitzer's power pack engine, which had more power than the K21's engine.

K22's tracks are composite rubber tracks(CRT) manufactured by Soucy Defense(Canada). Rubber tracks are lighter in weight than conventional steel tracks, but can retain the vehicle's load, and reducing vehicle vibration/noise and increasing fuel efficiency. In addition, CRT is easier to maintain than steel tracks. While conventional steel tracks need to be replaced every 5000 km and rubber packing needs to be replaced every 500 km, CRT only needs to be replaced entire tracks once every 5000 km without rubber packing replacement. In addition, CRT can be repaired by welding by troops using dedicated tools in the field.

Operators

 Joseon