Eusebia-Class Destroyer

Revision as of 17:05, 22 April 2022 by Cacerta (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
EusebiaClassDestroyer.png
Class overview
Name: Eusebia-class destroyer
Builders: Royal Shipbuilders of Cacerta
Operators: CRNEnsign.png Cacertian Royal Navy
Preceded by: Odilia-class
Succeeded by:
In commission: 1921 – 1939
Completed: 90
Lost: 15
Retired: 75
Preserved: 3
General characteristics
Type: Destroyer
Displacement:
  • 2,390 tons standard
  • 2,720 tons fully loaded
Length: 127.5 meters
Beam: 11.7 meters
Draft: 4.1 meters
Propulsion:
  • 3 × CNRC geared steam turbines
  • 3 × CNRC water-tube boilers
  • 3 × shafts each driving three-bladed propellers
Speed: 40 knots (74 km/h)
Range: 4,100 nautical miles at 20 knots
Complement: 250 officers and crew
Armament:
  • Guns:
  • 4 × 130mm RN-DI guns (4 × 1)
  • Anti-aircraft:
  • 2 × 75mm RN-DPII guns (2 × 1)
  • 2 × 40mm RN-AAIV guns (2 × 1)
  • 2 × MG50 machine guns (2 × 1)
  • Other:
  • 8 × 540mm torpedo tubes (2 × 4)
  • 2 × depth charge throwers
  • 52 × depth charges
  • 115 × mines

The Eusebia-class was the first post-Divide War class of large destroyers built for the Cacertian Royal Navy starting in the early 1920s. They were designed as multipurpose, long-distance warships capable of fulfilling multiple roles. By comparison to their pre-Divide War predecessors, the Eusebias were over twenty meters longer with nearly twice the displacement. In an attempt to address the lackluster gun performance of Cacertian destroyers during the Divide War, the Eusebia-class mounted four recently developed 130mm naval guns in single gun mounts.

After the HMS Eusebia’s sea trials, they were considered a significant improvement of the previous classes in regards to performance and seaworthiness. The Cacertian Admiralty had envisioned the Eusebia-class to fully replace the entire CRN destroyer force, but the development of new technologies led to the creation of both the Ambra-class and Luciana-class destroyers. While both successor classes were arguably not as durable as the Eusebias, the technologies that were explored ultimately led to two very successful designs in the Vera-class and Elvira-class.

A grand total of ninety Eusebias would eventually be put to sea before production was halted in 1933. Many of the ships went on to see extensive careers during the Siduri War in which they were well regarded by their crews and commanding officers despite their age. The last Eusebia, HMS Dorotea, was decommissioned in 1939 after the end of the war.

Design

Armament

Armor

Propulsion

Construction

Service History

Current Status

Units