This article belongs to the lore of Ajax.

SPG44152 Archer: Difference between revisions

Jump to navigation Jump to search
mNo edit summary
Line 126: Line 126:


==Operational use==
==Operational use==
===[[Second Partisans' War]]
==Operators==
==Operators==
*{{VLK}}
*{{VLK}}

Revision as of 19:19, 14 February 2024

SPG44152 Archer
T39152.png
Archer SPG of the 4th Artillery Regiment, Baderia, 1961
TypeSelf-propelled artillery
Place of origin Velikoslavia
Service history
In service1944-1991
Used byVelikoslavia
Production history
DesignerHalcyon Armor Workshop
Designed1932-1938
ManufacturerVushok Armor Works
Produced1940-1963
No. built13,293
Specifications
Weight25.3 tonnes
Length8.50 m
Width3.10 m
Height2.50 m
Crew5 (earlier variants)
4 (later variants)

ShellSeparate loading charge and projectile
Shell weightHE; 40 kg (88.2 lb)
Caliber15.2cm (6 inch)
BreechInterrupted screw
Recoilhydro-pneumatic
Elevation–6° to 69.5°
Rate of fire4 rpm
Muzzle velocity508 m/s (1,666 ft/s)
Maximum firing range8 miles

ArmorCast turret

Hull front 30mm (upper part)
30mm (lower part),
Hull side 20mm
Hull rear 20mm
Hull top 10 mm
Hull bottom 15 mm
Turret front 40 mm
Turret side 30 mm

Turret top 20 mm
Main
armament
152mm S-1 Howtizer
Secondary
armament
16 x 76mm smoke grenade launchers
EnginePantra YV5 4 stroke 12 cylinder 32 liter water cooled diesel engine
500 hp at 2500 RPM
SuspensionTorsion Bar
Ground clearance0.45 m
Operational
range
330 km
Speed60 km/h on-road
40 km/h off-road

The SPG44152 Archer (Samokhodnaya Polevaya Gaubitsa), nicknamed the "the Fridge" by Velikoslav troops, is a Velikoslav Self-propelled artillery that entered service in 1944 and is based off the chassis of the T3976 Medium Tank. Designed to mount the robust and powerful 152mm S-1 Howitzer on a vehicle to support armored forces, the Archer served as the primary artillery vehicle of the Grand Armed Forces of Velikoslavia for more than forty years and remained in reserve service up until 1991. It is still used in numerous places around the globe today. Notably, the Archer was the mainstay of Velikoslav artillery in the Second Partisans' War, participating in every major engagement and produced by the thousands.

Development

Specifications

Hull and Turret

The SPG44152 uses a turret that is open at the rear and enclosed on the other sides, providing protection for the crew at the front, sides, and top. The hull is welded from rolled homogeneous armor and is divided into 3 compartments: the power compartment which houses the transmissions and the engine, the driving compartment, and the combat compartment. The engine and the transmissions are housed in the front right part of the vehicle. To the transmission's left are the driving mechanisms with chassis controls The combat compartment is located in the center of the vehicle, which is equipped with armored shielding. The ammunition rack is located to the rear in an armored structure built specifically for the purpose, which can hold 40 rounds of ammunition. The turret has a traverse range of 71.5 degrees to either the left or the right, and the maximum elevation range was from –6° to 69.5° degrees. The entire vehicle needs a crew of 5 to operate. The armor on the unit is designed to protect the crew from small arms fire and light guns, but not much more as the Archer is not designed for front line combat.

Armament

The main armament of the Archer is the S-1 152-mm howitzer. It has identical ballistic characteristics, internal mechanisms and uses the same ammunition a the towed version and the same factory that produced the S-1 was able to supply both the towed version and guns to mount on the Archer. A vertical, wedged gate is installed in the breech, along with a semi-automatic, free-floating ejector. To ease the loading process, the unit possessed a mechanical loader and eventually an autoloader on later variants in the 1970s. The gunner's seat has a panoramic sight for high-elevation indirect firing, and a direct-firing sight for observation of shell impact.

The main shell employed by the archer was the HE241 High Explosive Fragmentation shell fitted with three different possible fuse options. When fired with full propellant charge, the shells had a muzzle velocity of 508 meters per second with a maximum range of 8 miles. The HE241 has a steel casing and 5.83 kg of TNT as payload. When equipped with a contact fuse, it was capable of a 2100-square-meter area denial against enemy infantry in a standing profile, and was able to create a crater up to 1.2 m deep and up to 3.5 m in diameter. For greater effect against infantry, a fragmentation round is available which has fragmentation and air burst capabilities for damaging infantry formations. For anti-tank fire, the Archer can fire HEAT shells, with a penetration capability of up to 250 mm of Rolled Homogeneous Armor at a range of up to 3 km. Naval High-Explosive Semi-Armor-Piercing shells are also available, with the capability of penetrating 68 mm of RHA at a range of 2 km. As the service life of the vehicle wore on, special-purpose shells such as illumination rounds, smoke shells, concrete-piercing shells and chemical shells were all stockpiled for use. 4Zh5 and 54-Zh-536M propellant charges were used to fire HEAT and naval shells.

Communications

The Archer is equipped with a primary radio for communications and an internal intercom system for crew communications. Later variants were equipped with atmospheric and weather measuring devices to improve accuracy.

Engine, Transmission. and Chassis

A Pantra YV6 4 stroke 12 cylinder 32 liter water cooled diesel engine was mounted to the unit, which had several improvements over the base engine on the chassis. The oil filter was relocated for easier access during maintenance. The vehicle utilizes planetary transmission, with six shifts for going forward and two for reversing. In order to allow the chassis to deal with the increase recoil, hydraulic shock absorbers are located on the first and fifth rollers.

Variants

  • Archer-M1 (SPG44152-M1) - Primary production variant that comprised the bulk of the units produced, as it was necessary to change very little over the life of the machine.
  • Archer-M2 (SPG44152-M2) - Upgraded unit introduced in 1958 that featured improved sights and slightly more horsepower.
  • Archer-M3S (SPG44152-M3S) - Service life extension program for export customers introduced in 2004 adding a fire control computer, modern radio equipment, and a ballistics calculation system. These changes allow the Archer to be utilized by modern militaries.
  • Archer-X (SPG44152-X) - Series of prototypes introduced in 2021 designed to test fully automated artillery systems. Rather than build entirely new units, Archer-X units are old chassis that were stripped down and rebuilt.

Operational use

===Second Partisans' War

Operators