Template:Infobox dam/doc

Usage

Use the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.

{{{name}}}
{{{image_caption}}}
Official name	{{{name_official}}}
Country	{{{country}}}
Location	{{{location}}}
Coordinates
Purpose	{{{purpose}}}
Status	{{{status}}}
Construction began	{{{construction_began}}}
Opening date	{{{opening}}}
Demolition date	{{{demolished}}}
Construction cost	{{{cost}}}
Built by	{{{builder}}}
Owner(s)	{{{owner}}}
Operator(s)	{{{operator}}}
Upper dam and spillways
Type of dam	{{{dam_type}}}
Impounds	{{{dam_crosses}}}
Height (foundation)	{{{dam_height_foundation}}}
Height (thalweg)	{{{dam_height_thalweg}}}
Length	{{{dam_length}}}
Elevation at crest	{{{dam_elevation_crest}}}
Width (crest)	{{{dam_width_crest}}}
Width (base)	{{{dam_width_base}}}
Dam volume	{{{dam_volume}}}
Spillways	{{{spillway_count}}}
Spillway type	{{{spillway_type}}}
Spillway capacity	{{{spillway_capacity}}}
Upper reservoir
Creates	{{{res_name}}}
Total capacity	{{{res_capacity_total}}}
Active capacity	{{{res_capacity_active}}}
Inactive capacity	{{{res_capacity_inactive}}}
Catchment area	{{{res_catchment}}}
Surface area	{{{res_surface}}}
Maximum length	{{{res_max_length}}}
Maximum width	{{{res_max_width}}}
Maximum water depth	{{{res_max_depth}}}
Normal elevation	{{{res_elevation}}}
Tidal range	{{{res_tidal_range}}}
Lower dam and spillways
Type of dam	{{{lower_dam_type}}}
Impounds	{{{lower_dam_crosses}}}
Height (foundation)	{{{lower_dam_height_foundation}}}
Height (thalweg)	{{{lower_dam_height_thalweg}}}
Length	{{{lower_dam_length}}}
Elevation at crest	{{{lower_dam_elevation_crest}}}
Width (crest)	{{{lower_dam_width_crest}}}
Width (base)	{{{lower_dam_width_base}}}
Dam volume	{{{lower_dam_volume}}}
Spillways	{{{lower_spillway_count}}}
Spillway type	{{{lower_spillway_type}}}
Spillway capacity	{{{lower_spillway_capacity}}}
Lower reservoir
Creates	{{{lower_res_name}}}
Total capacity	{{{lower_res_capacity_total}}}
Active capacity	{{{lower_res_capacity_active}}}
Inactive capacity	{{{lower_res_capacity_inactive}}}
Catchment area	{{{lower_res_catchment}}}
Surface area	{{{lower_res_surface}}}
Maximum length	{{{lower_res_max_length}}}
Maximum width	{{{lower_res_max_width}}}
Maximum water depth	{{{lower_res_max_depth}}}
Normal elevation	{{{lower_res_elevation}}}
Tidal range	{{{lower_res_tidal_range}}}
{{{plant_name}}}
Coordinates
Operator(s)	{{{plant_operator}}}
Commission date	{{{plant_commission}}}
Decommission date	{{{plant_decommission}}}
Type	{{{plant_type}}}
Hydraulic head	{{{plant_hydraulic_head}}}
Turbines	{{{plant_turbines}}}
Pump-generators	{{{plant_pumpgenerators}}}
Pumps	{{{plant_pumps}}}
Installed capacity	{{{plant_capacity}}}
Capacity factor	{{{plant_capacity_factor}}}
Overall efficiency	{{{plant_efficiency}}}
Storage capacity	{{{plant_storage_hours}}}
Annual generation	{{{plant_annual_gen}}}
Website {{{website}}}
{{{extra}}}

{{Infobox dam
| name                        = 
| name_official               = 
| image                       = 
| image_size                  = 
| image_caption               = 
| image_alt                   = 
| location_map                = 
| location_map_size           = 
| location_map_caption        = 
| location_map_alt            = 
| coordinates                 = <!-- {{coord|..|..|type:landmark|display=inline,title}}-->
| country                     = 
| location                    = 
| purpose                     = 
| status                      = 
| construction_began          = 
| opening                     = 
| demolished                  = 
| cost                        = 
| builder                     = 
| owner                       = 
| operator                    = 
| dam_type                    = 
| dam_crosses                 = 
| dam_height_foundation       = 
| dam_height_thalweg          = 
| dam_length                  = 
| dam_elevation_crest         = 
| dam_width_crest             = 
| dam_width_base              = 
| dam_volume                  = 
| spillway_count              = 
| spillway_type               = 
| spillway_capacity           = 
| res_name                    = 
| res_capacity_total          = 
| res_capacity_active         = 
| res_capacity_inactive       = 
| res_catchment               = 
| res_surface                 = 
| res_max_length              = 
| res_max_width               = 
| res_max_depth               = 
| res_elevation               = 
| res_tidal_range             = 
| lower_dam_type              = 
| lower_dam_crosses           = 
| lower_dam_height_foundation = 
| lower_dam_height_thalweg    = 
| lower_dam_length            = 
| lower_dam_elevation_crest   = 
| lower_dam_width_crest       = 
| lower_dam_width_base        = 
| lower_dam_volume            = 
| lower_spillway_count        = 
| lower_spillway_type         = 
| lower_spillway_capacity     = 
| lower_res_name              = 
| lower_res_capacity_total    = 
| lower_res_capacity_active   = 
| lower_res_capacity_inactive = 
| lower_res_catchment         = 
| lower_res_surface           = 
| lower_res_max_length        = 
| lower_res_max_width         = 
| lower_res_max_depth         = 
| lower_res_elevation         = 
| lower_res_tidal_range       = 
| plant_name                  = 
| plant_coordinates           = <!-- {{coord|..|..|type:landmark|display=inline}}-->
| plant_operator              = 
| plant_commission            = 
| plant_decommission          = 
| plant_type                  = 
| plant_hydraulic_head        = 
| plant_turbines              = 
| plant_pumpgenerators        = 
| plant_pumps                 = 
| plant_capacity              = 
| plant_capacity_factor       = 
| plant_efficiency            = 
| plant_storage_hours         = 
| plant_annual_gen            = 
| plant_annual_gen_year       = 
| website                     = 
| extra                       = 
}}

Parameter names and descriptions

Parameter name	Description
name	Name of dam.
name_official	Official name, if different from name. Preferably in native language.
image	Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed.
image_size	Value to overrides the default 250px.
image_caption	Caption beneath image.
image_alt	Alternative text for image.
location_map	Name of a location map file. The coordinates must be specified as well (see below).
location_map_size	Value to overrides the default 250px.
location_map_caption	Caption beneath location map.
location_map_alt	Alternative text for location map.
coordinates	Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise.
country	Country where the facility is located. Do not use flag icons.
location	General area where located. Avoid being overly-detailed.
purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation, N=Navigation, P=Power.
status	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began	Date construction began, consider using {{Start date}}.
opening	Date, or future date, of inauguration. Consider using {{Start date}}.
demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost	Total cost of development.
owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.
dam_crosses	Body of river or stream below dam
dam_height	Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation	Height over foundation bed, with metric conversions.
dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.
dam_length	Length of dam crown, with metric conversions.
dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.
dam_width_crest	Width at crest of dam, with metric conversions.
dam_width_base	Width at base of dam, with metric conversions.
dam_volume	Volume of material in the dam structure.
spillway_count	Number of spillways.
spillway_type	Type of spillway.
spillway_capacity	Capacity of spillway.
RESERVOIR
res_name	Name of upstream body of water, if different than "dam_crosses".
res_capacity_total	Capacity of reservoir, i.e. megalitres.
res_capacity_active	The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.
res_catchment	Area of catchment for reservoir.
res_surface	Surface area (top water level) of reservoir.
res_max_length	Length of the reservoir at normal levels, with metric conversions.
res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth	Maximum water depth of reservoir.
res_elevation	The reservoir's height above sea level at normal levels, with metric conversions.
res_tidal_range	Tidal range, if applicable.
POWER STATION
plant_name	Name of plant, if applicable.
plant_coordinates	Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise.
plant_operator	Operator(s) of the hydroelectric power plant.
plant_commission	Power plant commissioning date. May be different than dam opening date.
plant_decommission	Power plant decommissioning date. May be different than dam closing date.
plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head	Hydraulic head at power station.
plant_turbines	Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines.
plant_pumpgenerators	Number of reversible turbine-generators (pump/generators), with respective rated capacity. For pumped storage plants only.
plant_pumps	Number of pumps, with respective rated capacity. For pumped storage plants only.
plant_capacity	Current installed capacity in megawatts, or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity.
plant_capacity_factor	Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources.
plant_efficiency	Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage.
plant_storage_hours	Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage.
plant_annual_gen	Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. GW·h suffix will auto added for number without unit or any text appended.
plant_annual_gen_year	Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text: Planned net if given data is a planned estimate net output Planned gross if given data is a planned estimate gross output YYYY net, if given data is year YYYY net output YYYY gross if given data is year YYYY gross output Annual net if given data is a average net output Annual gross if given data is a average gross output
website	Raw wikitext for entering website(s). Use [brackets] where appropriate
extras	Free form, spans both columns. Use sparingly.

The coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking category

• Category:Pages using infobox dam with unknown parameters (0)

TemplateData

Click the [show] link to the right to display the TemplateData.

This is the TemplateData documentation for this template used by VisualEditor and other tools; see the monthly parameter usage report for this template.

TemplateData for Infobox dam

Infobox for a dam

Template parameters

This template prefers block formatting of parameters.

Parameter		Description	Type	Status
Name	name	Name of dam	String	optional
Official name	name_official	Official name, if different from name. Preferably in native language.	String	optional
Image caption	image_caption	Caption beneath image.	String	optional
Image alternative text	image_alt	Alternative text for image.	String	optional
Location map caption	location_map_caption	Caption beneath location map.	String	optional
Location map alternative text	location_map_alt	Alternative text for location map.	String	optional
coordinates	coordinates	Geographic coordinates using the coord template	String	optional
Country	country	Country where the facility is located. Do not use flag icons.	String	optional
Location	location	General area where located. Avoid being overly-detailed.	String	optional
Purpose	purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power.	String	optional
Status	status	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.	String	optional
Construction began	construction_began	Date construction began, consider using {{Start date}}.	String	optional
Opening date	opening	Date, or future date, of inauguration. Consider using {{Start date}}.	String	optional
Demolished date	demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.	String	optional
Cost	cost	Total cost of development.	String	optional
Owner	owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example Owner1: 60%<br/>Owner2: 40%	String	optional
Operator	operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.	String	optional
Dam type	dam_type	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.	String	optional
Dam crosses	dam_crosses	Body of river or stream below dam	String	optional
Dam height over foundation	dam_height_foundation	Height over foundation bed, with metric conversions.	String	optional
Dam height over thalweg	dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.	String	optional
Dam length	dam_length	Length of dam crown, with metric conversions.	String	optional
Dam elevation crest	dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.	String	optional
Dam width crest	dam_width_crest	Width at crest of dam, with metric conversions.	String	optional
Dam width at base	dam_width_base	Width at base of dam, with metric conversions.	String	optional
Dam volume	dam_volume	Volume of material in the dam structure.	String	optional
Spillway count	spillway_count	Number of spillways.	Number	optional
Spillway type	spillway_type	Type of spillway.	String	optional
Spillway capacity	spillway_capacity	Capacity of spillway.	String	optional
Reservoir name	res_name	Name of upstream body of water, if different than "dam_crosses".	String	optional
Reservoir capacity	res_capacity_total	Capacity of reservoir, i.e. megalitres.	String	optional
Reservoir active capacity	res_capacity_active	The active, live or useful capacity (storage) of the reservoir.	String	optional
Reservoir inactive capacity	res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.	String	optional
Reservoir catchment area	res_catchment	Area of catchment for reservoir.	String	optional
Reservoir surface area	res_surface	Surface area (top water level) of reservoir.	String	optional
Reservoir maximum length	res_max_length	Length of the reservoir at normal levels, with metric conversions.	String	optional
Reservoir maximum width	res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.	String	optional
Reservoir maximum depth	res_max_depth	Maximum water depth of reservoir.	String	optional
Reservoir elevation	res_elevation	The reservoir's height above sea level at normal levels, with metric conversions.	String	optional
Reservoir tidal range	res_tidal_range	Tidal range, if applicable.	String	optional
Plant name	plant_name	Name of plant, if applicable.	String	optional
Plant operator	plant_operator	Operator(s) of the hydroelectric power plant.	String	optional
Plant coordinates	plant coordinates	Geographic coordinates of the power station using the coord template	String	optional
Plant commissioning date	plant_commission	Power plant commissioning date. May be different than dam opening date.	String	optional
Plant decommissioning date	plant_decommission	Power plant decommissioning date. May be different than dam closing date.	String	optional
Plant type	plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.	String	optional
Plant hydraulic head	plant_hydraulic_head	Hydraulic head at power station.	String	optional
Plant turbine count/capacity	plant_turbines	Number of turbines, with respective rated capacity.	String	optional
Plant generation capacity	plant_capacity	Installed generation capacity, measured in megawatts (MW).	String	optional
Plant capacity factor	plant_capacity_factor	Capacity factor of the power station, in percentage.	String	optional
Plant annual power generation	plant_annual_gen	Average annual power generation of the previous year. Measured in gigawatt-hours (GWh)	String	optional
Website	website	Raw wikitext for entering website(s). Use [brackets] where appropriate	Content	optional
Extra data	extra	Free form, spans both columns. Use sparingly.	String	optional