AMX-45: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 30: | Line 30: | ||
| spec_label = AMX-45B3 | | spec_label = AMX-45B3 | ||
| mass = 47.1 tonnes (Basic)<br>53.5 tonnes (Combat) | | mass = 47.1 tonnes (Basic)<br>53.5 tonnes (Combat) | ||
| length = {{cvt|6.6|m|ft}} (w/o gun forward)<br>{{cvt|9.7|m|ft}}(w/ gun forward) | | length = {{cvt|6.6|m|ft}} (w/o gun forward)<br>{{cvt|9.7|m|ft}} (w/ gun forward) | ||
| part_length = | | part_length = | ||
| width = {{cvt|3.3|m|ft}} | | width = {{cvt|3.3|m|ft}} | ||
Revision as of 20:23, 9 June 2021
| CCP-ARE Model 1974 | |
|---|---|
| Type | Main battle tank |
| Place of origin | Sieuxerr |
| Service history | |
| In service | 1974-Present |
| Used by | Sieuxerr |
| Production history | |
| Designer | GIAT Industries |
| Designed | 1963-1974 |
| Manufacturer | Roanne Tank Plant |
| Produced | 1974-1997 |
| No. built | 8,000~ |
| Specifications (AMX-45B3) | |
| Length | 6.6 m (22 ft) (w/o gun forward) 9.7 m (32 ft) (w/ gun forward) |
| Width | 3.3 m (11 ft) |
| Height | 2.5 m (8.2 ft) (To turret roof) |
| Crew | 4 (Commander, gunner, driver, loader) |
| Armor | Laminated steel/ceramic/composite mixture along with modular armor packages |
Main armament | GIAT CN105-F1 (50 rounds) GIAT CN120-26/52 (40 rounds) |
Secondary armament | M693 20mm coaxial autocannon (600 rounds) AA-MAS M.57 machine gun (2,500 rounds) |
| Engine | 8-cylinder diesel engine 1,400 hp (1,000 kW) |
| Power/weight | 26.1 hp/t (19.5 kW/t) |
| Transmission | SCT 2000 |
| Suspension | torsion bar |
| Ground clearance | .4 m (1.3 ft) |
| Fuel capacity | 1,400 l (370 US gal) |
Operational range | 550 km (340 mi) |
| Speed | 70 km/h (43 mph) |
| References | |
The AMX-45 is a Sieuxerrian third-generation main battle tank that was designed by GIAT Industries (Now Nexter) in 1973. It was one of the first main battle tanks in Septentrion to be equipped with a high-velocity 120mm smoothbore gun as standard armament.
Development
Development of the AMX-45 began after the lackluster trial performance of the AMX-30 in the 1960s, citing automotive and protection inefficiencies. The first improvement over the AMX-30 design would be the AMX-30, which replaced the previously cast steel turret with a welded turret, a the turret also featured an air gap between two sheets of armor.
Design
OFL 120 F2
Armament
EIREL
Protection
Variants
- AMX-30
- Prototype model produced in the 1960s, only 8 produced.
- AMX-45
- First production model.
- AMX-45D
- Armored recovery vehicle based on the AMX-45.
- Engin Blindé du Génie
- Combat engineering vehicle.
- Series of large caliber air defense guns.
- Series of smaller caliber air defense vehicles.
- AMX-45B
- First upgrade to the tank in 1983. Added hunter-killer capabilities to the FCS and improved armor protection.
- AMX-45B Amélioré
- Adaption of the AMX-45B to be applied to older AMX-45 series tanks.
- AMX-45B2
- Digitization of the AMX-45. Accepted in 1985. Added vastly improved armor protection as well as improved drive train. Applied to new build and older tanks.
- AMX-45EX
- Final production model accepted into Sieuxerrian service. Further improved digitization.
- Self-propelled howitzer