Space Station Cheonji

Jump to navigation Jump to search
Space Station Cheonji
천지 우주정거장
SSCh.jpg
Station statistics
COSPAR IDTemplate:COSPAR
SATCAT no.50001
Call signCheonji, Station, Central
CrewFully crewed: 6
Currently aboard: 12
(ZSA Expedition 21)
Launch21 December 1999; 25 years ago (1999-12-21)
Launch pad
Mass≈ 479,725 kg (1,057,613 lb)
Length72.0 m (236.2 ft)
Width100.7 m (330 ft)
Height≈ 19.8 m (65 ft)
Pressurised volume906.08 m3 (31,998 cu ft)
Atmospheric pressure101.3 kPa (29.9 inHg; 1.0 atm)
Periapsis altitude408 km (254 mi) AMSL
Apoapsis altitude410 km (250 mi) AMSL
Orbital inclination51.64 degrees
Orbital speed7.66 km/s [ 27,600 km/h; 17,100 mph ]
Orbital period92.68 minutes
Orbits per day15.54
No. of orbits112,277 as of October 2019
Orbital decay1.8 km/month

Space Station Cheonji (Modern Zhenian: 천지 우주정거장), is a Zhenian space station operating at low earth orbit since 1997 to the present, operated by the Zhenia Space Agency. As the single largest Zhenia-owned artificial satellite in orbit as well as the most expensive single asset currently owned by the Government of Zhenia, it primarily serves as an orbital laboratory for microgravity and space environment and an orbital communications center for space missions by the Zhenia Space Agency. It completes one orbit around the planet in around 93 minutes and finishes more than 15 orbits a day.

With the first station module, the Cheonji Module, launched in 1999, initial construction of the station was completed in August 4, 2013, although new modules to replace older modules launched in the 2000s is set to begin in 2020. Original plans to replace the station with the newer Space Station Changgung had begun in 2018, although the Zhenia Space Agency currently plans to operate both space stations simultaneously as a part of the low-earth orbital network, possibly as assembly points for outer space exploration.

Purpose

Construction History

Manufacturing

Assembly

The assembly of Space Station Cheonji initiated in December 1999, with the launch of the Cheonji Module near the current orbit of the space station; subsequent modules were delivered via numerous Mirinae Space Shuttle missions and manufactured robotically into the Cheonji Module, which was eventually designated as the mission control center of the entire station. By 2019, both through EVA and the deployment of the Cheonryong Robotic Arm, a total of 175 parts have been assembled to form the station.

Operation

Components

Mission Modules

Cheonryong Robotic Arm

Main Article: Cheonryong Robotic Arm

Cost

Future

See Also