Furbish customary units: Difference between revisions

Jump to navigation Jump to search
No edit summary
No edit summary
Line 116: Line 116:
==Time==
==Time==
{{main|Furbish calendar#Time}}
{{main|Furbish calendar#Time}}
Since the Furbish Revolution, The Furbish Islands used the [[Furbish calendar]], which split the day into 10 hours of 100 minutes of 100 seconds. Since 119 (1923), the Furbish second was defined as {{frac|108|125}} of an SI second.
Since the Furbish Revolution, The Furbish Islands used the [[Furbish calendar]], which split the day into 10 hours of 100 minutes of 100 seconds. Weeks are 10 days long, months are 3 weeks or 30 days, and there are 12 months in a year along with 5 or 6 complementary days. Since 119 (1923), the Furbish second was defined as {{frac|108|125}} of an SI second.


==Mass==
==Mass==

Revision as of 09:38, 4 May 2023

Furbish customary units are a system of measurement units used in The Furbish Islands since being adopted in 1815. Furbish units were based off several measurement systems used by countries that colonized the islands, mainly the Fluvan and Mavonan systems. The system is used today along with several local systems and SI units. The units and their sizes are governed by the Office of Weights and Measures, currently part of the Ministry of Economic Affairs. Since 119 (1923) Furbish units were defined in terms of the SI system.

History

During the colonial period, many different local systems of measurement existed in The Furbish Islands, even in areas part of the same country. The metric system was officially adopted during the Furbish Revolution, though it was not as widely accepted by the general public as the Furbish calendar was. Standardizing measurements was seen as a lesser priority among the issues facing the government at the time.

Following the Furbish Civil War, John Dodson created the Office of Weights and Measures, or OWM, in an attempt to resist adopting the metric system while still standardizing local units. In their 12 (late 1815) report, they developed the current system of measurements for quantities including length, area, volume, and mass. Though for the latter they used units typically used to measure weight, a report by Joseph McNab argued they should be used for mass instead, and proposed another system of units for weight, force, and other mechanical quantites, based around the foot, pound, and Furbish second, now known as the McNab System. This system was chosen by the OWM out of several competing proposals. A temperature scale by Ulysses Callan, known as the Callan scale, was also recommended by the OWM in their report.

The 12 report was officially adopted by the National Assembly in the Weights and Measures Act of 12. It established the OWM as a government body under the newly formed Ministry of Economic Affairs with the power to regulate Furbish units of measurement. The definitions of all units were based on prototypes stored in a vault under Boston, later moved to an undisclosed location in the outskirts of the city.

Several additions have been made to the original system. One of the most substantial changes was Jodie McLachlan's 59 (1863) additions to the McNab system, which included units for work. The Dieleman system of electromagnetic units, developed by Jelle Dieleman, was adopted in 75 (1879). In 119 (1923), the OWM redefined all Furbish units to be in terms of SI units.

Repeated pushes have been made to replace Furbish customary units with the SI system. Jozef van Biddinghuizen's Order on Weights and Measures in 71 (1875) reintroduced the system in several applications but was not able to replace Furbish units. The most recent attempt at adopting SI was the Weights and Measures Act of 149 (1973), which introduced SI units to more applications but were still unable to replace the Furbish system. In the modern day, both systems are taught in schools and widely used. Furbish units are used in many industrial applications, while SI is used mostly in science. Government documents and road signs list both systems.

Length

Unit SI (metric) Imperial Definition
Twip (Tp) 16.5 μm 0.00065 inches 120 of a point
Point (Pt) 0.33 mm 0.013 inches 16 of a line or ​172 of an inch
Line (Ln) 1.98 mm 0.78 inches 14 of a barleycorn
or ​112 of an inch
Barleycorn (Bc) 7.92 mm 0.31 inches 13 of an inch
Inch (In) 23.77 mm 0.94 inches 23.77 millimeters
Thumb (Th) 47.54 mm 1.87 inches 2 inches
Palm (Pm) 95.08 mm 3.74 inches 2 thumbs or 4 inches
Link (BL) 19.97 cm 7.86 inches 8.4 inches
Foot (Ft) 33.28 cm 13.10 inches 7 thumbs or 14 inches
Cubit (Cb) 47.54 cm 18.70 inches 5 palms or 20 inches
Ell (El) 66.56 cm 26.20 inches 2 feet or 28 inches
Yard (Yd) 99.83 cm 39.3 inches 3 feet or 42 inches
Pace (Ps) 1.66 m 65.5 inches 5 feet or 70 inches
Rod (Rd) 3.99 m 13.10 feet 4 yards or 12 feet
Perch (Pr) 7.99 m 26.20 feet 2 rods or 24 feet
Chain (BC) 19.97 m 65.51 feet 100 links or 5 rods or 60 feet
Arpent (Ar) 79.87 m 262.03 feet 10 perches or 240 feet
Furlong (Fl) 239.61 m 786.09 feet 3 arpents or 720 feet
Mile (Mi) 1677.21 m 1.04 miles 7 furlongs or 5040 feet
Old Einnergans
(OEn)
5031.63 m 3.13 miles 3 miles, approximately one
conventional hour's walk
New Einnergans
(En)
11740.47 m 7.30 miles 7 miles, approximately one
Furbish hour's walk

The units of length were developed by the newly created Office of Weights and Measures their 12 (late 1815) report. They were based on different units used by countries that colonized The Furbish Islands, mainly the Fluvan system. From 12 to 119 (1923) the lengths were based on a foot long rod stored in the OWM's vault. Since 119 an inch was defined to be 23.77 millimeters and all other units were based on it.

The most commonly used units of length are the barleycorn (colloquially shortened to "barley" or "bar"), foot, yard, and mile. The chain, based on one created by Seymour Bell, has been historically used for surveying. The following are some uses for different units:
Twip:
Point:
Line:
Barleycorn: Main unit used to measure short lengths.
Inch:
Thumb:
Palm:
Link: Historically used in surveying. 100 links equals one Bell's chain.
Foot:
Cubit:
Ell:
Yard:
Pace:
Rod:
Perch: Used for shorter distances. A Furbish football pitch is between 14.5 and 15.5 perches in length and 8.5 to 9.5 perches in width.
Chain: Historically used in surveying. Based on Bell's chain, which is made up of 100 links.
Arpent:
Furlong:
Mile:
Old Einnergans:
New Einnergans:

Area

Volume

Liquid

Solid

Temperature

The main temperature scale used is the Callan scale, developed by Ulysses Callan in late 11 to early 12 (mid to late 1815). It is abbreviated °Ca. 0 °Ca is equivalent to -10 degrees Celsius, the coldest recorded temperature in The Furbish Islands at the time, while 150 °Ca is equal to around 50 °C, the hottest recorded temperature at the time. This sets the freezing point of water at 25°Ca, boiling point at 275 °Ca, and human body temperature at 117.5 °Ca.

In 50 (1854), Leon Gardiner proposed the Absolute Callan Scale, called the Gardiner scale by the OWM and abbreviated as °G. It is equivalent to the Callan scale but starts at absolute zero, therefore the temperature in degrees Gardiner is equal to the temperature in degrees Callan plus 657.875. 0 °Ca is equal to 657.875 °G, and water freezes at 682.875 °G.

Since 119 (1923), a degree Callan or Gardiner was defined as 2.5 times a degree Celsius, and the temperature in degrees Callan was exactly the temperature in degrees Gardiner minus 657.875.

The following are formulas to convert between temperatures in degrees Celsius and Kelvin, and Callan and Gardiner:

a °Ca to g °G: g = a + 657.875

g °G to a °Ca: a = g - 657.875

a °Ca to c °C: c = a − 25/2.5

c °C to a °Ca: a = c × 2.5 + 25

a °Ca to k K: k = a + 657.875/2.5

k K to a °Ca: a = k × 2.5 − 657.875

g °G to c °C: c = g − 682.875/2.5

c °C to g °G: g = c × 2.5 + 682.875

g °G to k K: k = g/2.5

k K to g °G: g = k × 2.5

The following are formulas to convert temperature intervals between degrees Celsius and Kelvin, and Callan and Gardiner

a °Ca or g °G to c °C or k K: c = k = a/2.5 = g/2.5

c °C or k K to a °Ca or g °G: a = g = c × 2.5 = k × 2.5

Time

Since the Furbish Revolution, The Furbish Islands used the Furbish calendar, which split the day into 10 hours of 100 minutes of 100 seconds. Weeks are 10 days long, months are 3 weeks or 30 days, and there are 12 months in a year along with 5 or 6 complementary days. Since 119 (1923), the Furbish second was defined as ​108125 of an SI second.

Mass

Other mechanical units

Miles per hour

Miles per Furbish hour (m/h), not to be confused with imperial miles per hour (mph), is the most common unit used to measure speed.

The following are formulas to convert between m/h, and mph and km/h.

b km/h to a m/h: a = b × 1.4309

c mph to a m/h: a = c × 2.3029

a m/h to b km/h: b = a × 0.6988

a m/h to c mph: c = a × 0.4342

McNab System

Unit Quantity SI (metric)
equivalent
Conversion
factor
Foot per second (Ft/s) speed, velocity metre per second XXX

The most commonly used system of units is the McNab system, proposed by Joseph McNab in 12 (1815). It uses the system in the section above as mass rather than weight. For derived units, the foot, pound, and Furbish second are used.




Electromagnetic units

Dieleman system

Unit Quantity SI (metric)
equivalent
Conversion
factor
Foot per second (Ft/s) speed, velocity metre per second XXX

Lorem ipsum dolor sit ament